We use cookies to ensure you have a better experience on the site. We use third-party cookies to send you personalized promotional messages. For more information on cookies and their disabling, consult the Cookie Policy. If you continue browsing you consent to the use of cookies.
 

AMOTHERM STEEL 400 SB/FD

Solvent-based intumescent coating for fire protection of steel elements

White, solvent-based, intumescent coating designed to enhance the fire resistance of structural steel elements and frameworks. Classified according to EN 13501-2, tested in accordance with EN 13381-8, and holding European Technical Assessment (ETA) 24/0599.

Fire resistance class: R15 to R120

 
CHARACTERISTICS AND APPLICATION
Brushing
Spraying
Roller
 
 
Product information

Technical features

  • Forms a continuous, adherent protective layer on the substrate.
  • Does not alter the aesthetic appearance of steel structures
  • Does not increase the weight or alter the geometry of the structural element to which it is applied.
  • Can be finished with a colored topcoat.
  • Suitable for both interior and exterior applications.

 

Applications 

Specialized fire protection system for structural steel elements in buildings intended for civil and industrial use.

 

Drying time

  • AMOTHERM STEEL 400 SB        Minimum 6 hours
  • AMOTHERM STEEL 400 SB/FD Minimum 4 hours

when overcoating with itself and at a thickness of 750 μm

 

Consumption 

Defined according to the structural element to be protected and the required technical performance. The required thickness of the intumescent coating is determined by the massivity factor and the critical temperature of the steel element. Values are detailed in the assessment report.

Recommended treatments 

Steel, interior

  • 1 x Amotherm Steel Primer SB
  • Amotherm Steel 400 SB/FD applied in several coats until prescribed amount is reached
  • 1 x Amotherm Top SB (optional for colored finish request)

Galvanized steel, interior

  • 1 x Amotherm Steel Primer WB
  • Amotherm Steel 400 SB/FD applied in several coats until prescribed amount is reached
  • 1 x Amotherm Top SB (optional for colored finish request)

Exterior

  • 1 x Amotherm Steel Primer Epoxy SB
  • Amotherm Steel 400 SB/FD applied in several coats until prescribed amount is reached
  • 1 x Amotherm Top PU SB (mandatory and possibility of colored finishes)

Packaging  

20 Kg

 

Certifications

  • Classified according to EN 13501 – 2
  • Tested according to 13381 – 8
  • European Technical Assessment ETA 24/0599
 
 
Documents
DOWNLOADS TDS
 
SAFETY DATA SHEET AND CERTIFICATES


 
 
 
 
Contact

"*" indicates required fields

Nome*
Indirizzo*
Accettare privacy*
This field is for validation purposes and should be left unchanged.