LIGNEX AQUAGEL
WATER-BASED THIXOTROPIC LONG-LASTING TOP COAT
Protects and renovates – Aquagel is a top coat preservative which can be used for many different types of application. It can be used indoors and outdoors and is resistant to UV rays, weathering and humidity, leaving the wood open- pored . It is odourless and is ideal for renovating grey or old wood as it lightens and evens out the damaged surface leaving a pleasant wax effect.
Features
- Leaves the pores of the wood open and controls the exchange of moisture between the wood and the air
- Special UV absorbers provide good protection against sunlight
- No dripping during application due to its gel form
- High yield, easy to use
- Makes wood water-resistant
- Creates a pleasant wax effect
- Evens out the colouring of wood in need of restoration and brightens up wood that has turned grey over time
Applications
As an impregnating treatment for outdoor and indoor wood, not subject to dimensional stability and not in direct contact with the soil or water. Particularly recommended for restoring degraded wood surfaces exposed to bad weather.
Drying time
After about 2 – 4 hours depending on the type of wood
Yield
About 10 – 14 m²/l per coat
Certifications
Tested according to EN 71-3 Toy safety – Migration of certain elements
Packaging
0.750 l – 2.5 l – 5 l – 25 l* (*only 00 colourless and white 51)
Recommended treatments
- Indoors:
- 1 – 2 x Lignex Aquagel
- Outdoors, new:
- 1 – 2 x Hydrogrund Plus or Aqualignex I
- 1 – 2 x Lignex Aquagel
- Outdoor restoration work:
- 1 – 2 x Lignex Aquagel
* For production purposes some colours on the chart may be made using the Colormix system. Colours thus obtained may differ slightly from the ready-made shades. A colour test should always be done when work is continued.
Find out more about ETHIC GREEN project
